Material Safety Data Sheet Ultra Concrete Floor Leveller

Identification Of The Substance/Preparation and Company/Undertaking

2 Composition/Information on Ingredients Chemical Description:

Consists of a mixture of cement powder, (Chromium VI present, less than :0.02%)
Ingredient EINECS ELINC CAS Classific Risks
ation Content
High Alumina Cement - - 65997-16-2 Xi 5-10% R41
Silica Sand - - 14808-60-7 None 30-60%
Pulverised Fuel Ash - - - Xi 5-10% R36138
Blast Furnace Slag - - Xi 10-30% R36/38
Portland Cement - - 65997-15-1 Xi 1-5% R41

3 Hazards Identification

4 First-Aid Measures

5 Fire-Fighting Measures
Non-combustible solid.
Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions.

6 Accidental Release Measures

7 Handling and Storage

8 Exposure controls/personal protection

9 Physical and chemical properties

10 Stability and reactivity

11 Toxicological information

- May cause blistering of the skin
- May cause redness and irritation
- May cause burning sensation
- May cause gastro-intestinal disturbances
- Can cause damage to the eyes
- Can cause damage to the mucous membranes

12 Ecological information

13 Disposal Considerations:

Disposal should be in accordance with local, state or national legislation.

14 Transport information:
Not classified as hazardous for transport.

15 Regulatory information:

This S Data Sheet does not constitute a workplace risk assessment Classification and labeling:
This Safety
2001 /58/EC
Irritating to eyes and skin (R36/38)
Risk of serious damage to eyes (R41)
Irritating to respiratory system and skin (R37/38)
Irritating to eyes and skin (R36/38)
In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice (S26)
After contact with skin, wash immediately with plenty of soap and water (S28)
Wear suitable protective clothing, eye/face protection and gloves (S36/37/39)

16 Other Information
Training advise:
Recommended restrictions on use:
Should always be used in accordance with material data sheet.

Further information:
Sources of key data used to compile the data sheet:

If any further information is required contact Instarmac Group plc Should always be used in accordance with material data sheet. (written references and/or technical contact point); Contact Instarmac Group for
further information.
Chemicals (Hazard Information and Packaging for Supply) Regulations 2002 The Compilation of Safety Data Sheets (Third Edition) Control of Substances Hazardous to Health (Regulations) 1998 Manual Handling Operation Regulations
1992 Information collated from raw materials suppliers. EH4O/2002

Users of products supplied by Instarmac Group plc should take appropriate measures to ensure working practices are in accordance with the Control of Substances Hazardous to Health Regulations (COSHH).

All information is based on results gained from experience and tests and is believed to be accurate but is given without acceptance of liability for loss or damage attributable to reliance thereon as conditions of use lie outside our control. Users should always carry out sufficient tests to establish the suitability of any products for their intended applications. No statements shall be incorporated in any contract unless expressly agreed in writing nor construed as recommending the use of any product in conflict of any patent. All goods are supplied to Instarmac Group plc's general conditions of sale.

Applicable Laws:
Risk Phrases:
Risk Phrases Quoted in section 2:
Safety Phrases:

Sheet is provided in compliance with the EC Directive