Cutting and Shaping Cablewarm® Under Floor Heating Mats

NOTE: Never cut the cable, this will invalidate the manufacturer’s guarantee: only the mat backing mesh can be cut.

The Cablewarm® heating cable should be no closer than 50mm from the walls and any other fixed obstruction. NEVER bury or try to hide the cable, if necessary start again.If you have ordered the wrong size of mat contact Floor Heating Ltd. Provided that the mat and cable have not been cut, laid or damaged in anyway, then it can be exchanged.

Once the Cablewarm® heating mat is laid, test the circuit using an ohmmeter to check the resistance readings (multimeters are available from Floor Heating Ltd). The correct ohms reading can be found on the information label on the Cablewarm® heating mat cold tail.

Finally, to prevent potential damage to the Cablewarm® heating cable, avoid excess traffic over the area until the final flooring is laid.